How Does Paint Dry? The Practical Implications of Paint Wicking for Professional Painters Reply

Luis had been out sick for three days when he finally returned to finish the job. The client was glad that Luis was feeling better and eager to see the job finished. All that remained was touching up the wall near the trim. Luis had a steady hand and was sure the client would be excited with the final result.

However, after finishing all the corner-work and trim work, Luis started to notice that the paint appeared to be a different color than the rest of the wall. The difference was subtle and it was unlikely anyone, including the client, would ever notice. But Luis noticed, and it aggravated him. As he lay in bed ill for the previous three days, he had worried that this might happen. Some of the paint he applied today was actually going over the paint from earlier that had already dried. And that was causing a problem.


Mix it Well, Mix it Right: How to Select the Appropriate Paint Disperser Reply

When you’re a professional painter, choosing the right tools for the job is every bit as important as your paint skill. From knowing which type of bristle material is best to which type of clear coat gives the most protection and shine, the tools of your chosen craft are integral to your success.

So it’s no wonder that the people making the very paint you use – the chemists, mixers, and manufacturers – rely on a tool set that is every bit as varied and versatile as the tools you use when painting. From glossometers to spectrophotometers, from haze meters to grind gages, the tools and test measurement equipment used in paint factories around the world are how you know that the paint you’re using is as close to perfect as possible.


Out With the Old: Tips for Color Matching Old Paint 1

After six years of home ownership, my hallways and living room needed some touching up. We host parties with lots of guests. Our daughter plays with her toys. Two dogs run and play all day. It seems that “everyday living” in our home takes a toll on the walls, just as it does in homes all around the world. Over time, various nicks and spots and scuffs and streaks make their way onto the walls. The easiest fix is to simply paint over the imperfections and start the clock over until it’s time to touch up the walls again a few years down the line.

The records we kept when the home was built indicated the name of the paint manufacturer and listed the color as “Canvas.” Simple enough…away I went to the paint store to order a gallon of “Canvas” in a flat finish. An hour later I was back home and ready to work. With brush in hand, I addressed all the hallmarks of a home well-loved and lived in. There were scuffs left by tricycle tires against the hallway walls when our daughter was learning to ride. A chip where I’d bumped the wall while moving a coffee table years ago. One after another, I touched up and repainted all the little spots that add up over time. And in a few places that were simply dirty, I cheated and painted over that as well (even though I know better). Content with my work, I left the paint to dry for a few hours before checking on each spot.


Pair Up: Finding Partners to Help Your Paint Business Grow Reply

“I know a perfect interior decorator who can help you…”

“We work with a printing company that would be great for producing the flyers you need…”

“Let me contact a colleague of mine…that new website design you need is right up his alley.”

One of the best ways to grow any business is to find partners to work with. Working with someone else that offers a different, but complementary, service to your offerings can help lead to better solutions for your customers and increased revenue for you both. While a vendor is a company that sells you a good or service for a flat fee, a partner relationship is much more organic. A partner is someone with common interests that can help you just as you help them in return, so your relationships with your partners will evolve and change as both of your businesses grow.


Rise of the Machines – Paint Surface Preparation at the Harley Davidson Plant 1

Automobiles and motorcycles feature some of the most complex paint work anywhere. Not only do the coatings have to look great from bumper to bumper, the paint must also hold up well against sun damage, wind, and rain, while also preventing rust and corrosion of the substrate for years on end. Properly painting a car, truck, or motorcycle requires some of the most complex layering of paint and protective coating of any product or structure. But long before the first sprayer starts painting, the surface must be properly prepared. One of the world’s most popular motorcycle manufacturers, Harley Davidson, has a unique approach to surface preparation that blends robotic precision with human craftwork.


Keep It Clean: Understanding Paint Surface Preparation in Professional Painting 1

Justin saw the problem right away. The new member of his paint team had done a great job on the entire room….except for a spot the size of a dinner plate that looked terrible.

“You didn’t clean the wall, did you?” he asked. The new member of the team looked dumbfounded. Justin continued, “That area on the wall was dirty before you started. And now the paint is different on that spot because you tried to paint over something that wasn’t supposed to be there. My guess is that it’s some old glue or grease that the builder didn’t see on the sheetrock.”

It didn’t matter to Justin or the client that the rest of the room looked great. That one spot was an eye-sore and would have to be addressed right away.


Control the Conversation: How to Handle Negative Online Reviews of Your Paint Business Reply

“Jack’s paint work was sloppy. We were very dissatisfied.”

“The painter showed up two hours late to do the work in dirty clothes.”

“The workers were unprofessional and left empty paint cans behind when they were finished”

“We had to hire a different painter to come in and repaint the room. I wouldn’t hire ABC Paint company ever again.”

As a professional painter, your intentions are likely genuine. Your hope is that every client loves your work and says good things about you. Reality is much different. Some people are impossible to satisfy and sometimes things simply don’t work out for one reason or another. How do you tell your side of the story in a professional and dignified manner? Is it even possible to get a word into the conversation?


Keep Your Service Safe and Sound: Risk Mitigation in Your Paint Business Reply

“There’s a treasury agent on the phone?”


“I said, ‘there is a treasury agent on the phone.’ He’d like to speak with the owner of the business.”

Heath was startled and confused by what his assistant was telling him. What on earth did a treasury agent want with him this morning? He picked up the receiver.

“Good morning Mr. Young…” The voice on the other end of the line was blunt and direct. “I’d like to speak to you about a few members of your paint crew.”

Heath’s stomach dropped. This could be trouble of the worst kind for both him and his paint business.


Getting Ready to Work: Creating Your “Professional Painter’s Checklist” Reply

Jesse saw the high ceilings as soon as the client opened the door. They were at least fourteen feet high, probably closer to sixteen. It was a beautiful entryway for a beautiful home with a chandelier and moldings. The new coat of paint was going to look sensational… a mild beige for the walls and a glossy ivory for the trim.

Jesse stole a look out the door to his truck parked in front of the client’s house. The ladder strapped to the roof was only eight feet tall. He could probably manage to get the walls painted using the extension handle on his roller, but the trim was an entirely different matter. After reviewing the rest of the rooms he would be painting, Jesse excused himself to go back to the truck and gather his materials. As he walked down the driveway, he made a quick call back to the office: “My work sheet doesn’t say anything about high ceilings and trim….we’re going to need scaffolding out here…”


The Right Thickness Every Time: Automatic Film Applicators and Industrial Paint Testing Reply

The development and creation of paint most often happens in a laboratory far away from paint stores and job sites. Chemists and scientists spend hours upon hours formulating the exact right combination of materials to make a paint that performs exactly as they intend. From holding color, to protecting the substrate, to adhering to the surface and not cracking for years on end, formulating a paint that can be utilized in a production environment is a rigorous and detail-oriented process.

In the laboratory, these scientists and engineers count on a number of tools to help them make sure that what they are making can be repeated on a large scale and utilized by professional painters on paint jobs all over the world. And while tools like spectrophotometers, adhesion testers, and gloss meters provide a wealth of information about a paint’s true chemical characteristics, this represents only half of the test equation.